Mf-Net possibilities for greenhouse applications

The Mf-Net line is an open modular control system for various applications. By means of simply adding various modules together, you can go from stand-alone controllers to high solution, integrated control systems. The in-and output signals from main controllers and power units are easy to connect by 0-10 Volt or regular electric connections, resulting in various combinations.


Humidcon-s: humidity regulator

The Humidcon-s can regulate the humidity in an area by activating a spray system and ventilators. The 'on' and cycle time of the valves in the spray system can be set accurately using the programmable timer. If no humidity sensor is connected, the ventilators contain to run and the valves in the spray system are activated continuously, in accordance with the preset 'on' and cycle time. If a humidity sensor has been fitted, the relative humidity can be read off and set. When the reading is too low, the Humidcon-s regulates the relative humidity by activating the spray valves in cycles, in accordance with the preset value. If the humidity climbs above the set value, the spray valves are disactivated and the ventilator continues to run for one hour.


For more information go to: Humidcon-s


Manulink-2: electronic manual override controller

The Manulink-2 provides a manual override control or a loop-through of a 0-10V signal. It offers the possibility to control slave units and supplementary controllers. The Manulink-2 can be set on automatic mode (loop-through), on manual mode or can be switched off. This enables full control of the 0-10V signal. With the three 0-10V outputs, the Manulink-2 can control several slave units in parallel. It can also be used as a 0-10V output signal inverter and as a 0-10V signal booster.


For more information go to: Manulink-2


T15-WD: mechanical thermostat

The T15-WD can switch on and off devices (fans, heaters, alarms) at a set temperature. The T15-WD series is intended for single-phase use.

    Benefits

  • Low investment
  • Easy to install
  • Easy to operate
  • Durable and robust
  • Applicable for both new and existing ventilation systems


For more information go to: T15-WD